KEMPER SYSTEM has developed a roof patch as a quick emergency solution that provides a temporary fix for a leaking roof. The ready-to-use KEMPEROL® Roofpatch may be applied directly to leaking and damaged areas to effect reliable repairs. Rapid sealing in tried-and-tested KEMPEROL® quality for cracks in bitumen sheets, PVC roofing sheets, concrete, wood, screed and metal.
The advantages at a glance:
- Fast emergency repairs
- No odours
- No priming
- No solvents
- Immediately at hand
- No additional tools
- Clean application
- No left-over material
- Tried-and-tested KEMPEROL® quality
UV-resistant. Water vapour permeable. Bridges cracks. Fleece-reinforced. Cold applied. Solvent-free. 1-part
- For repairing leaks. For flat and sloping surfaces
|Working time:||approx. 90 minutes*|
|Rain resistant after:||approx. 120 minutes*|
|Ready for foot traffic after:||approx. 16 hours*|
|Cured after:||approx. 16 hours**|
|Ready for further coating after:||approx. 24 hours***|
|Pack sizes:||6.5kg and 14kg|
|Typical coverage rate:||3.0 - 4.0 kg/m2 depending on the substrate|
* Values obtained at a temperature of 23°C / 50% relative humidity. These values vary depending on the weather conditions, such as wind, humidity and temperature.
** With a layer thickness of 2 mm.
*** Interruptions of more than 3 up to 14 days: Clean the working area with KEMCO® MEK Cleaning Agent.
- Patches measure 41 x 27 cm in aluminium bags
- 5 patches in a carton
Please Note: All quantities and times are approximate.