KEMPEROL® 022 - Solvent-Free And Odourless Liquid Waterproofing For Indoor Areas Underneath Tiled Surfaces
Wherever water is present, effective, dependable waterproofing is required. Tiled surfaces provide a robust wearing course, but are never 100% waterproof. Moisture always manages to find its way through the joints and grouting into the substrate which can damage the fabric of the building. If preventative steps aren‘t taken from the outset, this can lead to expensive and unnecessary repairs.
KEMPEROL® 022 is solvent-free and odourless liquid-applied waterproofing with full-surface KEMPEROL® 500 Fleece reinforcement.
The waterproofing can be applied wet-on-wet in a single process to any primed, stable surface, saturating a reinforcement fleece to create a membrane that cannot delaminate. The wet surface is subsequently scattered with KEMPERTEC® NQ 0408 natural quartz. This provides the perfect surface for tiles to be fixed directly on to the cured waterproofing using KEMPERDUR® MT mineral tile adhesive.
The waterproof resin bonds directly to the substrate and cures to provide an homogenous, seamless, elastic membrane incorporating all surfaces, penetrations and outlets without the need for additional jointing tape, mastics or sealants. The fleece reinforcement ensures that the waterproofing is permanently durable and withstands substrate cracks and joint movement.
KEMPEROL® 022 - Uses and benefits
KEMPEROL® 022 Waterproofing can be applied to wet room walls and floors with direct or indirect load and floor drainage.
It is ideal for commercial, hospitality or domestic kitchens and bathrooms, shower installations and utility rooms.
- European Technical Approval (ETAG 022 tested)
- Full surface fleece reinforced
- Even layer thickness (finished layer thickness 1mm)
- Solvent-free can be used without disruption
- Bridges 1.5mm cracks and spans joints up to 2mm
- No additional joint tapes, sealants or mastics required
- No special tile backing boards required
- Fast application and curing