KEMPERFIX adhesive is a cold applied structural adhesive used to bond the KEMPERTHERM® insulation board to the vapour barrier once this has been self-adhesively fixed to the substrate.
It foams when exposed to moist air and forms an exceptionally strong bond when cured.
It is applied directly from the container in snakes or strips, the insulation should be bedded and consolidated onto the Kemperfix within ten minutes and cures within approx. one hour at ambient temperatures.
A fully matched and tested component to be used as part of the STRATEX warm roof system which has excellent adhesive strength.
Versatile and easily applied
A matched Stratex component
Allows practical working times but fully cures within one hour
Coverage up to 5m2 / Kg
Kit size 5.6 Kg
Viscosity: 4000 ±500cps @25°C
KEMPERFIX fixings should be used whenever the insulation is to be mechanically fixed to the substrate.
KEMPERFIX fixings are fully compatible with the STRATEX warm roof system.
Tested and approved component
Low profile - stress plate self-rebates for a flush finish
Range of lengths available
6.3mm diameter x 75mm to 200mm lengths available
Dural 1000 hr protective coating (Tested to DIN 50021 SS)
75mm self rebating fixing plate
Typical pullout values 2.35kN (plywood); 3.70 kN (concrete)
Breaking load: Sheer 9.2kN; Tensile 12.3kN