Application of liquid resins occurs in three steps. It must be ensured that the substrate has been correctly pre-treated and that application is carried out in suitable weather conditions. Refer to the application instructions for specific application details.
The basic principle is as follows:
|Apply 2/3 of the resin||Roll out the fleece without bubbles and creases||Apply the remaining 1/3 of the resin up to the saturation point|
After appropriate curing periods, the waterproofing can be walked on or an additional topcoat applied.
KEMPER SYSTEM products are only applied by trained personnel in order to ensure maximum quality of the products. For training courses, please contact us.
|Film sequences (silent)|
|Waterproofing of drains|
|Connection of drains to the full surface|
|Fleece cuttings for waterproofing drains|
|Waterproofing of air-conditioning plants|
|Fleece cuttings for waterproofing air-conditioning plants|
|Waterproofing of domed roof-lights|
|Fleece cuttings of domed roof-lights|
|Waterproofing of ventilation pipes|
|Fleece cuttings for waterproofing of ventilation pipes|
|Waterproofing of a flat roof|
|Waterproofing of edges|
|Waterproofing of a wall joint|