Dir Sir or Madam,

KEMCO® QB1 Binder is a solvent-free, single component product for direct application. It ensures a non-slip surface with a silk-matt finish.

The new binder can be universally applied to surfaces both indoors and outdoors. KEMCO® QB1 Binder together with KEMCO® Decor Stone / Natural Stones or COELAN® Coloured Quartz allows you to produce numerous design ideas for patios, balconies, living rooms, sales rooms and bathrooms.

KEMCO® QB1 Binder - It's so simple

Open the KEMCO® QB1 Binder, stir thoroughly and use a paddle mixer to mix it into KEMCO® Decor Stone / Natural Stones or COELAN® Coloured Quartz. Subsequently apply the mixture to the substrate evenly, making sure it is compacted properly.

A lubricant is not required, as the material does not stick to the trowel during application.


Advantages of the new KEMCO® QB1 Binder at a glance

  • Suitable for indoor and outdoor use
  • Solvent free
  • Odourless
  • Single component
  • Transparent
  • Easy to apply
  • Easy to smooth (without admixtures)
  • Light-stable
  • Abrasion-proof
  • Slip resistant after curing
  • Low soiling tendency
  • Waterresistant
  • Storable for 12 months


KEMCO® QB1 - Tested safety

All our products are tested by external laboratories, this guarantees the high quality of our products:

  • Tested according to DIN EN 16000-9;2008-04 (Evaluation Scheme of the committee for Health-Related Evaluation of Building Products (AgBB) for analysing the emmissions of voletile organic compounds in building products 
    • In habitable rooms in Germany, it is only possible to use floor coatings which have been tested to AgBB specifications and approved by the German Centre of Competence in Civil Engineering (DIBt)
  • Tested fire class Bfl-s1 low flammability to DIN EN 13501-1
  • Tested slip resistance R9 to DIN 51130
  • Tested resistance to cleaning agents, beverages, etc. similar to DIN 68861. We passed it with an excellent result
  • CE Mark in conjunction with waterproofing

Information to KEMCO® QB1 Binder

  • The lower the relative humidity, the slower the curing process
  • Application temperature +10°C to +30°C
  • The new binder should be applied to surfaces without adhesive layer, because material accumulations of KEMCO® QB1 Binder will result in unwanted bubble formation
  • Priming with KEMPERTEC® EP and EP5 Primer or COELAN® Primer EP Plus

KEMPER SYSTEM GmbH & Co. KG | Holländische Straße 32-36 | D-34246 Vellmar | Germany
www.kemper-system.com | post@kemper-system.com | Phone: +49 (0)561 8295-0 | Fax: +49 (0)561 8295-10
Managing director Andreas H. Wiggenhagen | Holger Freyaldenhoven